Alvus: 給電領域を自由に構成可能な2次元無線給電システム
Alvus: A Reconfigurable 2D Wireless Charging System

2019年08月08日

室内のあらゆる平面に無線給電機能を付加することで、ユーザは意識することなく電子機器を充電できるようになる。そこで我々は、ユーザが2次元の無線給電エリアを自由な形に構築できるシステムを提案する。本システムのモジュールを敷き詰めるだけで、机、床、壁といった平面のあらゆる位置に置かれたデバイスへの給電が可能になる。

We present a system that allows users to freely (re)construct a 2-D wireless charging surface. By simply placing our ready-made modules, we can add wireless charging capability to the surface such as desks, floor, and wall. This enables electronic devices to be charged anywhere on the surface.

Kazunobu Sumiya, Takuya Sasatani, Yuki Nishizawa, Kenji Tsushio, Yoshiaki Narusue, Yoshihiro Kawahara

Contact: sumiya@akg.t.u-tokyo.ac.jp

再構成可能な二次元無線給電システムのためのトポロジー構築プロトコル
Topology Construction Protocol for Wireless Power Transfer System with a 2-D Relay Resonator Array

室内のあらゆる平面に無線給電機能を付加することで、ユーザが意識することなく電子機器を充電できるようになる。そこで我々は、ユーザがモジュールを敷き詰めるだけで自由に二次元状の給電領域を構成できるシステムを提案してきた。従来はBluetoothを用いて制御信号のやりとりを行っていたが、本研究では磁界を介した隣接モジュール間の通信のみに基づいたプロトコルを構築することで、安定性と拡張性を向上する。

The cost of deploying wireless power transfer (WPT) technology into products remains high, due to the made-to-order design process. To alleviate the engineering cost to adapt to each use case, a reconfigurable 2-D WPT system based on magnetic resonance coupling was recently proposed. This system dynamically obtains the topology of the modules via inter-module communication. However, stable communication gets difficult as the number of modules increases or other traffics co-exist. To overcome these challenges and construct a robust and scalable system, we proposed a topology construction protocol based on “in-band” communication.

Masahiro Morita, Takuya Sasatani, Ryo Takahashi, Yoshihiro Kawahara

Contact: morita@akg.t.u-tokyo.ac.jp